1- Press Green button
3- Red button
4- Menu button
Press right arrow several times until you see nagravision
Now depend on the key that changed and it is active you must scroll down til proper key to be changed
Example: On 06/09/05 ECM key 01 is active. Scroll down
to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter
follow code definition button on your TV screen)
Press OK for 5 seconds.
1- Press Menu
2- Scroll Down to Parental Control,
3- Press "i" key on remote, then enter pin
4- Scroll down to Set Default Key, Press
5- Scroll up to Nagravision, Press Enter
6- Press VOL Right twice, you will see Dish Network
7- Press CH Down once, then VOL Right Twice, you will now see
Nagravision 2 displayed top left
You are now at the
key 00, Press CH Down once so you can edit the Key Data
Enter your new keys (write down the old ones to be safe)
Press Ok to store, then repeat with key 01
exit until you get back to tv, all channels will be available
enter manual key
10 xx xx xx xx xx xx xx xx xx |
11 xx xx xx xx xx xx xx xx xx | <-- key 0 here
20 xx xx xx xx xx xx xx xx xx |
21 xx xx xx xx xx xx xx xx xx | <--key 1 here
1) Press EXIT
a Keys window will open "Current key info."
to the right of the word "Index", you'll find the active Key to
so...Index: 0x00000001 means key01 is active
Index: 0x00000000 means key00 is active
2) Press yellow button.
Enter first half of key string. When you're done, go down to OK, and press. You'll
be asked "Wish to save changed data?" YES (OK button)
Yellow button again. Enter the second half of key string. Go down to ok. Save changed data. Now you're back to Keys window.
3) Push exit button
Menu + 9999
Key Manager, OK
Key Index, OK
Go down to the appropriate field and hit OK
Use your arrows to navigate and enter codes.
left to Keyworks
Enter the Menu's by pressing OK
Enter the keys as needed with the buttons as instructed on screen.
Press ok on the options to save.
Use your arrows
to navigate and enter codes.
Basically the OK button
is your access into the menus. Pressing it on different options brings you to the next.
To go back press exit.
After the patch
has been enabled:
1- Go to a scrambled channel for that provider.
Press PAGE DOWN on remote
3- Press RED button on remote
4- Enter the current active key (for letters use CH UP/DOWN keys
on remote and OK)
5- Select "ok" (under F) and press
OK on remote ..at this time you'll have video and sound
4000 / 5000 / 6000
Enter 8282 with remote as if choosing channel to open CAS Menu.
Use volume up and down button on remote to scroll to Nagravision
Use channel up and down button on remote
to scroll to different Key Slot IDs and Key Slots.
(Use the Info button for letters A-F . Press
it once for A , twice for B , Etc and channel number key pad for number entries Or you can press OK and it will open a Keyboard
selection type menu to enter keys.)
When key change
is complete, Press Exit and confirm key change save.
XX XX XX XX XX XX XX XX <-- first half of key0 (86) here
 XX XX XX XX XX XX XX XX <-- second half of key0 (86) here
 XX XX XX XX XX XX XX XX <-- first half of key1 (96) here
 XX XX XX XX XX XX XX XX <-- second half of key1 (96) here
Enter Keys (see sample above)
Exit and Save
1- Press MENU
2- Scroll down to System Setting.
3- Press OK.
If you see a red dot in the botton/left of your screen, go to step 5
4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins.
5- Press red button (audio).
6- Press right arrow until NAGRA appears in the first line.
7- Down arrow up to Provider and right arrow up to 0001.
8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key
9-Scroll down to second key line, press ok. and enter
10- Scroll To Save Key
11- Press OK
Exit and Enjoy
Go to the main menu
Select the Embedded CAS and choose softcam.
the set of keys that you want to update (01 OR 00), Provider Name, Provider ID & Provider Index.
Select the set of keys that you want to update (00 OR 01)
Using the on-screen keyboard, type in the new keys
Once you have completed the new key entry, click on the update green button on the remote and then
select yes to update button.
Exit and watch tv.
Enter = 8888 and the code edit menu
Press the blue button for more
Press the yellow button for nagra2
Exit and Save
SP6000 / SP6000 Premium
1- Press zero on the remote and that will take you into the menu where the keys are.
2- Set Encryption system (nagravision for dish or bev) by scrolling
left or rite with the remote.
3- Then scroll down with
your remote to the provider name.
4- Press OK button
once on the provider you wish to put keys in for. This will take you to the keys.
5- Scroll to the line you want to edit and push the blue button and a box will pop up for you to
put the keys in on the line you highlighted.
number will be at the top that you are editing so when you scroll to the first number or letter you want to change push ok
then the next number or letter you want push ok and so on and so on until you have the whole key changed to the numbers you
6- After you get the keys all put in for the line
you are editing push done and it will save it.
exit and watch tv
keys at default after loading a binfile:
1- push the
zero on your remote control
2- the keys menu will pop
up. and at the top in the CA System line it should be on nagravision, if not scroll left or right untill you see nagravision.
then push the blue button on your remote and it will be set at default.
3- push exit button and wait untill it finds the keys and watch tv.
SV1000 / 4000
10 xx xx xx
xx xx xx xx xx xx |
11 xx xx xx xx xx xx xx xx xx |
<-- key 0 here
xx xx xx xx xx xx xx xx xx |
21 xx xx xx xx xx xx xx
xx xx | <--key 1 here
PVR1000 / SV8000HD
7890 to enable the code menu
Enter updated keys
to your desired Provider
enter manual key
08 xx xx xx xx xx xx xx xx xx |<--
first half of key 0 (86) here
09 xx xx xx xx xx xx xx
xx xx | <-- second half of key 0 (86) here
88 xx xx xx xx xx xx xx xx xx |<-- first half of key 1 (96) here
89 xx xx xx xx xx xx xx xx xx | <--second half of key 1 (96) here
Ultra / PVR7000
select User Setting
select CODE MENU
in CAS select NAGRA
scroll down to next box and select your desired Provider
enter keys (see sample above)
Pansat & Clones
Pansat 2500, 2700 & Clones of
press Parental Control
press Second Pin and enter 0000
press NAGRAVISION 2
scroll to your desired Provider
enter Key Data for Key Number 00 (aka 86)
Press OK to Store
up to Key Number field and then right arrow to change to 01
enter Key Data for Key Number 01 (aka 96)
OK to Store
Exit out and your done
Spacestar / Sonysat
Choose Configuration - Embedded Cas
- Nagra 2 - Then press idea Dish Part1.
There you will
see F1 & F2
Update F1 with the first half of the
Update F2 with the second half of the key.
After updating the keys, press "EPG" to save then press "EXIT"
and watch tv!
While watching tv on a scrambled channel, enter 6969
Press blue key on remote control
Use channel down, scroll down to provider number index 10
Enter (10) xx xx xx xx xx xx xx xx
Scroll down to provider number index 20
Enter (20) xx xx xx xx xx xx xx xx
down to provider number index 11
Enter (11) xx xx xx xx xx xx xx xx
down to provider number index 21
Enter (21) xx xx xx xx xx xx xx xx
exit and watch tv!!
Choose Key Edit.
Enter keys carefully in each line.
Exit and save.
Press Red Button
keys carefully in each line.
Exit and save.
1- Press 6969 with your Orasat remote control.
Press COLOR BUTTONs for desired CAS(Video Encryption) on your remote.
(Red for SECA, Yellow for Viaccess,Green for Irdeto, and Blue for Nagravision)
3- Now you are in Code Edit Screen.
Provider C10100 is BEV and 010100 is DN as you can refer following figures.
Number 1 & 2 are BEV Nagravision 2 Key values. (Index 00 & 01)
Number 3 & 4 are DN Nagravision 1 Key values. (Index 00 & 01)
Number 5 & 6 are DN Nagravision 2 Key values. (Index 10 & 20)
4- Once you choose Provider and Index to change Key value, press OK button.
Then small pop-up screen comes out for entering new key.
5- Enter index and new key using the number pad on the remote
or the on screen key pad.